Horizontal baling press for waste POD 500
The loading of the horizontal baler for waste POD 500 is done automatically.
The bales can have different lengths, and can be extended at any time due to its modular design. Moving to the storage area is done by conveyors placed at ground level.
Particularities of waste compactors:
- bales compacting and securing with wires is fully automated
- cost saving by optimizing the handling, storage and waste disposal rate
- resistance and durability to intensive use
- easy use for operators due to safety buttons, various sensors, emergency shut down button for overload situations
Technical specifications
| Length (without / with bale chute) | 4000/4700 mm |
| Width | 2100-3135 mm |
| Height | 2000 mm |
| Height of feed table | 900 mm |
| Width of feed table | 800 - 1000 mm |
| Weight | 1950 kg |
| Bale length, infinity adjustable | 600 - 1200 mm |
| Bale width | 500 mm |
| Bale height | 400 mm |
| Bale weight, depending on baling material | 40 to 60 kg |
| Bale density, depending on baling material | 240 - 380 kg/m3 |
| Capacity / throughput | up to 2 t/h |
| Pressing force | 7 t |
| Specific pressure | 35 N/cm2 |
| Time per working cycle | 4.5 s |
| Tying material | baling wire, oilder |
| Diameter of tying material | 2,2 mm Ø |
| in coils of approx. | 40 kg |
| Consumption of tying material | 3-4 kg/t |
| Diameter of coil | 340 mm |
| Height of coil | 155 mm |
| Three-phase motor / central hydraulic drive | 11 kW, IP 54 |
| Fuse, mains | 35 A slow |
